Skip to main content
All Posts By


OS16. Metalworking Evidence and the Management of Archaeological Sites

By HMS Datasheets

Archaeology Datasheet 16

Metalworking Evidence and the Management of Archaeological Sites

This datasheet is aimed at field workers in the early stages of projects, when the possibility of finding the remains of metalworking activity should be considered. The value of forward planning is stressed; where metalworking has been a significant activity on a site, then postponing identification of the evidence until the post-excavation phase is unacceptable. The advice is sequenced for different stages of the project so that requirements can be considered in advance, training implemented and contact with specialists arranged. For further guidance on the contribution that can be made by an archaeometallurgical specialist, the English Heritage Guideline (Bayley is recommended. Specific procedures are covered in more detail in other datasheets of this series and the reader is directed to these.

Download Datasheet Here

OS14. X-radiography and archaeometallurgy

By HMS Datasheets

Archaeology Datasheet 14

X-radiography and archaeometallurgy

X-radiography is a rapid imaging technique which is particularly useful for examining archaeological metalwork. The process is similar to conventional medical radiography and the two-dimensional negative image is usually produced on photosensitive film. Although Xradiography cannot identify the nature of the metals and other materials under examination, these may often be inferred from the morphology and densities in the image, and can be determined by analytical techniques such as scanning electron microscopy (SEM) based microanalysis and X-ray fluorescence (XRF) analysis (see Datasheet 12).

Download Datasheet Here

OS12. Chemical analysis of metalwork and metalworking debris

By HMS Datasheets

Archaeology Datasheet 12

Chemical analysis of metalwork and metalworking debris

The composition of artefacts or samples can be determined by chemical analysis. The method of analysis chosen depends mainly on the answers needed. Some types of chemical analysis are quantitative, providing precise information about composition in percentages or parts per million; others give qualitative results, identifying the main elements or compounds present, and provide a rough idea of relative concentrations. Some methods require samples which will be destroyed by the analysis (destructive analysis) but surface analysis can be performed without damage to the artefact. Other considerations are cost and availability of equipment.

Download Datasheet Here

OS11. Metallographic examination

By HMS Datasheets

Archaeology Datasheet 11

Metallographic examination

Metallography requires the removal of small samples, which are then mounted in a resin or bakelite block, polished and etched in dilute acid, before examination under a metallurgical microscope. This reveals the crystal structure of the metal, from which an assessment of the type of alloy and its mechanical and heat treatment history can be made. Metallography thus provides a good measure of the quality of the metal and its suitability for a particular application. Scott (1991) provides a good introduction to the structure of metals, metallography and the phase diagrams which help explain the microstructures it reveals.

Download Datasheet Here

OS10. Hammerscale

By HMS Datasheets

Archaeology Datasheet 10


Both types of hammerscale generally survive well in archaeological deposits and often retain their original metallic-lustrous sheen. They are generally too small to be recognised by the excavator, but can be recovered from soil
samples as they are strongly magnetic. Sometimes thick deposits become concreted together with iron hydroxides and may be dismissed as iron-panning.

Download Datasheet Here

OS08. Currency Bars and other forms of trade iron

By HMS Datasheets

Archaeology Datasheet 08

Currency Bars and other forms of trade iron

About 1500 currency bars and other forms of trade iron have been found in Britain, including two doublepointed ingots of continental type. Detailed examination of most of the 400 surviving bars has shown that there are at least 20 distinctive types, which can be distinguished by their dimensions, the shape of the socket and, sometimes, by the welding of the tips. A new class of trade iron has been recognised, consisting of billets with one end forged either to a hook-shape or to a long point.

Download Datasheet Here

OS06. Bloom refining and smithing slags and other residues

By HMS Datasheets

Archaeology Datasheet 06

Bloom refining and smithing slags and other residues

The smelting of iron by the direct process results in a bloom, which must be refined to produce forgeable iron stock. Blooms produced from bog ores in a non-tapping furnace would have had more entrapped slag and would have needed more refining than the cleaner blooms made from an ore which could be smelted by slag tapping. At least the initial stages of refining would be carried out at the smelting or primary production site, so that both smelting and refining residues can be found together.

Once refined the iron stock would be traded to the blacksmithing community and the smithing or forging of the iron would be carried out at a secondary production site, which could be a specialised workshop or a small forge attached to a settlement or a farm.

All the stages of refining and smithing produce broadly the same kinds of structural and residue evidence and there is little of it which is diagnostic of a specific stage of the process. The characterisation and interpretation of this kind of evidence depends mainly on the size and relative quantities of the different types of residue.

Download Datasheet Here

Click on the main text to go to those pages, clicking on the arrows shows you the sub pages